2.1.2
Mounting with Inclined Ceiling Mount
Steps:
1.
Paste the drill template (supplied) to the place
where you want to install the camera.
2.
Drill screw holes, and the cable hole on the
ceiling/wall according to the supplied drill template.
Screw Hole
Cable
Hole
Figure 2-6
The Drill Template
3.
Disassemble the inclined ceiling mount by the screw
driver.
4.
Install the turret camera’s mounting base on the
inclined ceiling mount’s cover with three PM4
screws.
Inc
lin
ed
Ce
ilin
g
M
ou
nt C
ov
er
Figure 2-7
Install
Turret
Camera’s Mounting Base
5.
Install the inclined ceiling mount’s body on the
ceiling/wall with four PA4
×
25 screws, as shown in
Figure 2-8.
In
clin
ed
C
eil
in
g
M
ou
nt
B
od
y
Figure 2-8
Fix the Inclined Base Body
6.
Combine inclined ceiling mount’s cover with its
body with supplied screws.
7.
Repeat steps 6 to 9 of the 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
Figure 2-9
Fix the Camera to the Inclined Base
2.2
Installation of Type II Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the turret camera. Ceiling mounting will be taken as
an example in this section. You can take steps of ceiling