screw holes and the cable hole in the ceiling
according to the drill template.
Figure 2-7
Drill Template
4.
Route the cables through the cable hole.
5.
Secure the mounting base to the ceiling with the
supplied screws. (You can drill the expansion screws
first or drill the fixing screws directly)
Fixing Screw
Expansion Screw
Figure 2-8
Fix the Mounting Base to the Ceiling
6.
Route the cables. Connect the power cord and
network cable.
7.
Secure the camera to the mounting base.
Figure 2-9
Secure the Camera
8.
Adjust the camera according to Figure 2-10 to get an
optimum angle.
1).
Hold the camera body and rotate the enclosure
to adjust the pan angle [0° to 360°].
2).
Move the camera body up and down to adjust
the tilt angle [0° to 75°].
3).
Rotate the camera body to adjust the Loosen
No.3 adjusting azimuth angle [0° to 360°].
Tilt Position Range
[0°-75°]
Pan Position Range
[0°-360°]
Rotation Position Range
[0°-360°]
Figure 2-10
3-axis Adjustment
2.2.2
Ceiling Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting with gang box.