You can select to turn on/off the IR LED to response to
the requirements of different circumstances.
SMART IR
The
Smart IR
function is used to adjust the light to its
most suitable intensity, and to prevent the image from
over exposure. The
SMART IR
value can be adjusted
from 0 to 3. The higher the value is, the more obvious
effects are, and it is disabled when the value is 0.
3.2.5
VIDEO SETTING
Move the cursor to
VIDEO SETTING
and press the
confirm button to enter the submenu.
CONTRAST
,
SHARPNESS
,
COLOR GAIN
,
DNR
and
MIRROR
are
adjustable.
VIDEO SET TING
CONTRAST
SHARPNESS
COLOR GAIN
DNR
MIRROR
RETURN
5
5
5
5
DEFAULT
Figure 3-5
Video Setting
CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the
CONTRAST
value from 1 to 10.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the
SHARPNESS
value from 1 to 10.
COLOR GAIN
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 10.
DNR (Digital Noise Reduction)
The DNR function can decrease the noise effect,
especially when capturing moving images in low light
conditions and delivering more accurate and sharp
image quality.
You can set the
DNR
value from 1 to 10.
MIRROR
DEFAULT
,
H
,
V
, and
HV
are selectable for mirror.
DEFAULT
: The mirror function is disabled.
H
: The image flips 180 degree horizontally.
V
: The image flips 180 degree vertically.
HV
: The image flips 180 degrees both horizontally and
vertically.
3.2.6
RESET
Reset all the settings to the default.
3.2.7
SAVE &EXIT
Move the cursor to SAVE &EXIT and press OK to save
the setting and exit the menu.