HIKVISION TandemVu DS-2SE4C215MWG-E/12(F0) User Manual Download Page 45

Chapter 6 Video and Audio

This part introduces the configuration of video and audio related parameters.

6.1 Video Settings

This part introduces the settings of video parameters, such as, stream type, video encoding, and

resolution.
Go to setting page: Configuration → Video/Audio → Video .

Note

For device with multiple camera channels, select a channel before other settings.

6.1.1 Stream Type

For device supports more than one stream, you can specify parameters for each stream type.
Main Stream

The stream stands for the best stream performance the device supports. It usually offers the

best resolution and frame rate the device can do. But high resolution and frame rate usually

means larger storage space and higher bandwidth requirements in transmission.

Sub Stream

The stream usually offers comparatively low resolution options, which consumes less bandwidth

and storage space.

Other Streams

Steams other than the main stream and sub stream may also be offered for customized usage.

6.1.2 Video Type

Select the content (video and audio) that should be contained in the stream.
Video

Only video content is contained in the stream.

Video & Audio

Video content and audio content are contained in the composite stream.

TandemVu PTZ Camera User Manual

33

Summary of Contents for TandemVu DS-2SE4C215MWG-E/12(F0)


















































































































Reviews: