HIKVISION Pyronix Enforcer 64, User Manual

Page: 34 / 44

Reference
Handover Form
Alarm Company:
Date of Installation:
Site Reference:
Engineer Name:
Engineer Contact Number:
Installed to Grade 2: Yes / No
Environmental Class:
Other Comments:
SMS Commands
You can send SMS commands to the panel via your mobile phone.
All SMS commands must start with a valid User Code and are not case sensitive unless the
utilised outputs are activated. If an SMS command is not recognised, the panel will send an
‘incorrect command’ message back to you.
Example SMS command send Description Example SMS command
response
Arming via SMS text command
1234 Arm A 1234 = User Code. Arm A = Will arm in Area A Final Arm; Area A
1234 Arm ABCD 1234 = User Code. Arm ABCD = Will arm in
Areas ABCD Final Arm; Area ABCD
NOTE: If no areas are specified then all areas will arm (default).
Disarming via SMS text command
1234 Disarm A
1234 = User Code. Disarm A = Will disarm in
Area A
Disarm; Area A
1234 Disarm ABCD 1234 = User Code. Disarm ABCD = Will
disarm in Areas ABCD. Disarm; Area ABCD
34 Enforcer User Guide 102017855 - V01