HIKVISION PanoVu Mini Series, User Manual, Page: 37 / 103

User Manual of Network PTZ Camera
© Hikvision
29
5.1.2 Configuring Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured picture
can be stored in the local storage or network storage.
Note:
FTP is invalid when sub-stream is enabled.
Steps:
1.
Enter the Snapshot settings interface:
Configuration > Storage > Storage Settings > Capture
Figure 5-3 Snapshot Settings
2. Click Capture Schedule to enter the capture schedule interface.
3. Select the timeline of a certain day, and drag the left button of the mouse to set the capture
schedule (the start time and end time of the recording task).
4. After you set the scheduled task, you can click and copy the task to other days
(optional).
5. After setting the capture schedule, you can click a capture segment to display the segment
capture settings interface to edit the segment capture parameters. (optional)
Figure 5-4 Segment Snapshot Settings
6. Click Advanced to enter the advanced setting interface. You can select the stream type of
the capture.