User Manual of Network PTZ Camera
© Hikvision
27
Chapter 5
System Configuration
5.1
Storage Settings
Before you start:
To configure record settings, make sure that you have the network storage device within the
network or the memory card inserted in your camera.
5.1.1
Configuring Recording Schedule
Purpose:
There are two kinds of recording for the camera: manual recording and scheduled recording. In
this section, you can follow the instructions to configure the scheduled recording. By default, the
record files of scheduled recording are stored in the memory card (if supported) or in the
network disk.
Steps:
1.
Enter Record Schedule settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
Figure 5-1
Recording Schedule Interface
2.
Select the camera channel to configure.
3.
Check Enable to enable scheduled recording.
4.
To set the advanced settings of the camera, click
to enter the advanced settings
interface.
Summary of Contents for PanoVu Mini Series
Page 1: ...PanoVu Mini Series Network PTZ Camera User Manual...
Page 103: ...UD10058B...