User Manual of PanoVu Series Network Camera
30
icon again to stop the camera.
Zoom
Click
, the lens zooms in, click
, and the lens zooms out.
Focus
Click
, the lens focus far and the items far away gets clear. Click
, the
lens focus near and the items nearby gets clear.
Iris
When the image is too dark, click
to open the iris. When the image is too
bright, click
to close the iris.
Adjust Speed
Adjust speed of pan/tilt movements.
Preset
Refer to 4.1.1 for detailed information of setting preset.
Patrol
Refer to 4.1.2 for detailed information of setting patrol.
Pattern
Refer to 4.1.3 for detailed information of setting pattern.
Note:
PTZ functions, including PTZ control, preset, patrol, and pattern are only supported by camera 1.
Auxiliary Functions
The auxiliary functions include light, wiper, auxiliary focus, lens initialization, manual tracking, 3D
positioning, one-touch patrol, and one-touch park.
The Auxiliary functions panel is shown in the figure below:
Figure 3-4
Auxiliary Functions
Descriptions of Icons on PTZ Control Panel are listed below:
Light Supplement
Click
to enable/disable the light supplement of the camera. This function is reserved.
Wiper
Click
to move the wiper once.
Auxiliary Focus
The auxiliary focus function is reserved.
Manual Tracking
Before you start:
Enter the Smart Tracking settings interface and enable smart tracking first.
Configuration > PTZ > Smart Tracking
Steps:
1.
Click
on the toolbar of live view interface.
2.
Click a moving object in the live video. The camera will track the object automatically.
3D Positioning
Steps:
1.
Click
on the toolbar of live view interface.