User Manual of PanoVu Series Network Camera
29
between that of main stream and sub stream. The default setting of
stream type is
.
Plug-in Switch
/
Click
to select between
and play the live video via
player Webcomponents or Quick Time. The live video is played via
webcomponents by default, and other types of players are supported for
the browser, such as MJPEG, and VLC. You are required to download and
install the player to play the live video.
Audio
/
Volume
Click
to display the
. Drag the slider to
adjust the volume.
/
Two-way Audio
Click
and it displays
. Click
to enable two-way audio and
the icon turns into
. Click the icon again to stop two-way audio.
Note:
Before enabling the two-way audio or recording with audio functions, set
the Stream Type to Video & Audio referring to Section 3.4.1 Configuring
Digital Zoom
/
Click
to enable digital zoom function and the icon turns into
.
Then drag the mouse towards low right direction to draw a rectangle on
the image as the desired zoom. After viewing it you can click any place of
the picture to get back to normal picture.
Regional Exposure
/
Click
on the toolbar to enter the regional exposure operation mode
and the icon turns into
. Then drag the mouse to draw a rectangle on
the image as the desired exposure region.
Regional Focus
/
Click
on the toolbar to enter the regional focus operation mode and
the icon turns into
. Then drag the mouse to draw a rectangle on the
image as the desired focus region.
PTZ Control Panel
On the live view page, click to show the PTZ control panel or click to hide it.
Descriptions of Icons on PTZ Control Panel are listed below:
PTZ Control
Hold the direction buttons to control the pan/tilt movements.
Click
and the camera keeps panning, the icon turns into
. Click the