MinMoe Temperature Screening Terminal Installation Guide
Hikvision Product Support Team
8
3.
Connect 220V AC power cable and power cable to floor stand
5.1.3
Device debugging and configuration
5.1.3.1
Debugging process
5.1.3.2
Temperature measurement configuration
1) Activate terminal with SADP/iVMS-4200 or from device local UI
2
）
Temperature settings
Default
enable
: device will verify face and measure temperature
If temperature is higher than the value, device will alarm
If temperature is lower than the value, device will alarm
Default
enable
: If temperature is not in the normal range, door will not open
Default
enable
: temperature measurement only; Disable: perm temperature
The parameters have been adjusted at the factory, no need to configure
The parameters have been adjusted at the factory, no need to configure
Reserved function
