HIKVISION LTK1802 Series, User Manual

Page: 10 / 14

4
Chapter 3 Installation
3.1 Definition of Cable
The description of cables is shown below.
Table3-1 Description of Cable
Color Description
Red PWR (+12 VDC)
Black GND
Purple Beep Control
Brown OK
Orange ERR
Green Wiegand W0
White Wiegand W1
Blue Wiegand 26/ 34
3.2 Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for Wiegand communication mode:
1. Set the Wiegand mode before power-on:
Cable Wiring Method Wiegand Mode
Blue Wiegand Cable
Grounded Wiegand 26
Not Grounded Wiegand 34
2. Wiring the cable between controller and card reader as
shown below.