IR Speed Dome Installation Manual
25
3.2.2
Corner Mounting Instructions
Steps:
1.
Drill four holes in the corner, insert M6 expansion screws (not supplied) into the holes, and
position the mount to the wall.
2.
Pass the power cord, video cable and control line through the opening of the corner mount.
Note:
Make sure the cables are long enough. For outdoor applications, you can use sealant to seal
the cable openings for waterproofing.
3.
Secure the mount to the corner by using nuts and washers. Tighten the expansion screws.
Figure3. 10 Install the Corner Mount
4.
Position the wall mount, fasten the hexagonal screws with the spring washers through the wall
mount and the gaskets, and tighten them with the corner mount.