Network Traffic Camera User Manual
60
3.
Select
Total Lanes
. Only 1 lane is selectable.
Figure 14-3
License Plate Recognition System Configuration
4.
Select
Trigger Type
.
Vehicle Detection
,
I/O Coil
, and
RS-485
are selectable.
Vehicle Detection
1)
Select
Picture Mode
.
Scene Picture
and
Scene P Close-up Picture
are selectable.
2)
(Optional) Check
Capture Plate Absence Vehicle
to capture the vehicle
without license plate.
3)
Select
Capture Mode
.
Strobe Light Mode
is selectable.
4)
Enter the
Linked Lane No.
ranging from 1 to 99. The lane No. will be
overlaid on the captured picture.
I/O Coil
1)
Select
Picture Mode
.
Scene Picture
and
Scene P Close-up Picture
are selectable.
2)
Enter the
Linked Lane No.
ranging from 1 to 99. The lane No. will be
overlaid on the captured picture.
3)
Select
I/O Trigger Default Status
.
Rising Edge
and
Falling Edge
are
selectable.