Network Traffic Camera User Manual
58
Chapter 14
Application Mode
Configuration
Purpose:
This chapter introduces the parameters configuration under different trigger mode.
The supported trigger modes vary according to the camera models.
Note:
The trigger modes below are for reference only. The trigger modes of the actual
device prevail.
14.1
Smart Mode
In this mode, target capture and license plate recognition are trigger by internal live
video analysis.
Steps:
1.
Go to
Configuration
>
Device Configuration
>
Application Mode
.
2.
Select
Application Mode
as
Smart Mode
.
3.
Select
Total Lanes
. Up to 3 lanes are supported.
Figure 14-1
Smart Mode Configuration