User Manual of Network Camera
89
1.
Click
Shield Region
tab to enter the shield region configuration interface.
2.
Click
Draw Area
. Draw area by left click end-points in the live view window,
and right click to finish the area drawing.
Notes:
●
Polygon area with up to 10 sides is supported.
●
Click Delete to delete the drawn areas.
●
If live view is stopped, there is no way to draw the shield regions.
3.
Click
Save
to save the settings.
Rule
The behavior analysis supports a series of behaviors, including line crossing
detection, intrusion, region entrance, and region exiting, etc.
Note:
Please refer to each chapter for detailed information of each behavior.
Figure 6-58
Configure the Rule