HIKVISION HiWatch HWI-B121H-M, User Manual, Page: 84 / 178

Network Camera User Manual
83
1.
Check the Enable ONVIF checkbox to enable the function.
2.
Add ONVIF users. Up to 32 users are allowed.
Set the user name and password, and confirm the password. You can set the
user as media user, operator, and administrator.
Note: ONVIF user account is different from the camera user account. You
have set ONVIF user account independently.
3.
Save the settings.
Note: User settings of ONVIF are cleared when you restore the camera.
Bandwidth Adaptation
When you enable the function, live view fluency is taken as the priority of camera
performance. The camera adjusts video-related parameters automatically, and the
pre-set video-related configuration is invalid. A reboot is required for the function to
take effect.
Note: Bandwidth adaptation is only available for certain camera models.
Network Service
You can control the ON/OFF status of certain protocol that the camera supports.
Note:
•
Keep unused function OFF for security concern.
•
The function is supported by certain camera model.
WebSocket or WebSockets protocol are used for plug-in-free live view.
When you use Google Chrome 45 and its above version or Mozilla Firefox 52 and its
above version to visit your camera, you should enable WebSocket or Websokets
protocol. Otherwise, live view, image capture, and digital zoom function are not
usable.
If the camera uses HTTP, enable WebSocket .
If the camera uses HTTPS, enable WebSockets .