HIKVISION HiWatch HWI-B121H-M, User Manual, Page: 137 / 178

Network Camera User Manual
136
Behavior Analysis
 Overlay & Capture
Display information includes the display on picture and display on stream.
Display VCA info. on Stream : The green frames will be displayed on the target
if in a live view or playback.
Display Target info. on Alarm Picture : There will be a frame on the target on
the uploaded alarm picture if the checkbox is checked.
Display Rule info. on Alarm Picture : The captured target and the configured
area will be framed on the alarm picture.
Note: Make sure the rules are enabled in your local settings. Go to
Configuration > Local Configuration > Rules to enable it.
Snapshot Setting: You can set the quality and resolution for the captured picture.
Upload JPEG Image to Center: Check the checkbox to upload the captured
image to the surveillance center when a VCA alarm occurs.
Picture Quality: High, Medium and Low are selectable.
Picture Resolution: CIF, 4CIF, 720P, and 1080P are selectable.
 Camera Calibration
Perform the following steps to three-dimensionally measure and quantize the image
from the camera, and then calculate the size of every target. The VCA detection will