QSG EPI-4215-DE3 030518NA
19
1.2.1
Enable Hik-Connect via a Web Browser
Before You Start:
Activate the
camera before enabling the service. Refer to Chapter 3.2. for more
information.
Steps:
1.
Access the camera via the Web browser. Refer to Chapter 4.
2.
Enter the platform access configuration interface, as follows:
Configuration
>
Network
>
Advanced Settings
>
Platform Access.
Figure 4-4
Platform Access Configuration (Web)
3.
Set the
Platform Access Mode
to
Hik-Connect
.
4.
Check the
Enable
checkbox.
5.
Click and read the “Terms of Service” and “Privacy Policy” in the
pop-up window.
6.
Create or change the verification code for the camera.
Note:
A verification code is required when you add the camera to Hik-Connect.
7.
Save the settings.
1.3
Add Camera to Hik-Connect
Before You Start:
Enable Hik-Connect on the camera before adding it to your Hik-Connect account. See
Chapter 5.1.
Steps:
1.
Use a network cable to connect camera to a router if the camera does not support
Wi-Fi.