QSG EPI-4215-DE3 030518NA
18
Note:
For configuration instructions, refer to the network
speed dome user manual.
1
Hik-Connect
Purpose:
Hik-Connect is a
mobile application to view live camera images, receive alarm
notifications, etc.
1.1
Enable Hik-Connect for Use with Cameras
Purpose:
Enable Hik-Connect should on your camera before using the service.
You can enable the service either via SADP software or a Web browser.
1.2
Enable Hik-Connect Service via SADP Software
Steps:
1.
Check the
Enable Hik-Connect
checkbox:
1).
For the “Activate the Device”
page that appears during camera activation, refer
to Chapter 3.2.2.
2).
For the “Modify Network Parameters” page that appears while modifying the IP
address, refer to Chapter 3.3.
2.
Create
or
change the verification code.
Figure 4-3
Verification Code Setting (SADP)
Note:
The verification code is required when adding the camera to Hik-Connect.
3.
Click and read the “Terms of Service” and “Privacy Policy.”
4.
Confirm the settings.