Network PTZ Camera
·
Quick Start Guide
45
For wooden wall, you can just use the self-tapping screw to fix
the bracket.
Make sure that the wall is strong enough to withstand more
than eight times the weight of the PTZ camera and its cable
Steps:
1.
Pull the bracket out from the side of the camera, and unclench the
decorative cover as shown in Figure 2-65.
Decorative cover
Bracket
Figure 2-65
Open the Decorative cover and pull out bracket
2.
The cables
can be routed either through the wall or on the wall
surface.
For the cables routed through the wall, it is required to drill a
cable hole on the wall, aligning it with the hole on the bracket,
