Network PTZ Camera
·
Quick Start Guide
10
2.
Align the memory card with the memory card slot and insert it.
3.
Fix the screws and assemble the PTZ camera.
2.1.5
DY3xxx Series PTZ Bullet Camera
For DY3xxx series PTZ bullet camera, the memory card slot is in the
camera module and if you need, the memory card can be installed
before the camera leaves the factory. In order to prevent damage,
we highly recommend that you do not disassemble the PTZ bullet
camera by yourself.
2.1.6
DE4AxxxI Series PTZ Camera
Steps:
1.
Remove the four silicone plugs on the decorative rim as shown in
Figure 2-11, and you can see four flange screws in the decorative
rim.
Silicone Plug
Decorative Rim
Figure 2-11
Remove the Silicone Plugs
2.
Loosen four flange screws with a screwdriver. Remove the bubble
and the decorative rim as shown in Figure 2-12.