Panic Alarm Station
User Manual
37
2.
Check
Enable Alarm Lamp Flicking
box.
3.
Select
Female/Male
voice for center busy file, refuse, and voice talking prompt.
4.
Select the ring tone.
5.
Slick
Save
to save the settings.
Image Settings
4.2.5
Video& Audio Settings
Steps:
1.
Click
Remote Configuration > Image > Video & Audio
to enter the video/audio configuration interface.
2.
Select a camera needs to be configured.
3.
Edit the general video parameters.
Scream Type
: The main stream is usually for recording and live viewing with good bandwidth, and the sub-stream can be used
for live viewing when the bandwidth is limited.
Video Type
: Select the stream type to video stream, or video & audio composite stream.
Bitrate Type:
Select the bitrate type to constant or variable.
Resolution:
Select the resolution of the video output.
Frame Rate:
The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames
per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image
quality throughout.
I Frame Interval:
Set the I-Frame interval from 1 to 400.
4.
Click
Copy to
to copy all these settings to other Zones.
5.
Click
Save
to save the settings.
OSD Settings
Steps:
1.
Click
Remote Configuration > Image > Video Display
to enter the OSD Settings interface.
