Panic Alarm Station
User Manual
23
Restart the System
Click
Reboot
to restart the device.
Restore Default Settings
Click
Restore Default Settings
to restore the default settings.
Except the IP address and user parameters, all other parameters of the device will be restored to factory default settings.
Restore All the Parameters to Default
Click
Restore All
to restore all the parameters to factory default settings.
After restoring the parameters to default, the device needs to be restarted.
Import Configuration File
The device supports importing the configuration file. Click
Import Configuration File
to import the file.
Export Configuration File
The device supports exporting the configuration file. Click
Export Configuration File
to export the file.
Import/Export IPC Configuration File
The device supports importing/exporting the IPC configuration file. Click
Import/Export IPC Configuration File
to
import/export the file.
Remote Upgrade
The device also supports remote upgrading. You can select the upgrade file including security control panel upgrading file and
alarm keypad upgrading file. Click
to select the local upgrading file and click
Upgrade
to upgrade the device. The
upgrading progress is shown below.
You need to enter the keypad address for keypad remote upgrade.
After upgrading, the device needs to be restarted.
Log Searching
Click
Remote Configuration >
System > Log
to search and view the logs. Set the search mode, major type, minor type, start time
and end time, and then click
Search
to search the log.
