background image

Rail Network Video Recorder Quick Start Guide 

Safety Instruction

 

These  instructions  are  intended  to  ensure  that  user  can  use  the  product  correctly  to  avoid  danger  or  property 

loss. 

 

The precaution measure is divided into “Warnings” and “Cautions” 

Warnings: 

Serious injury or death may occur if any of the warnings are neglected.

 

Cautions:

 

Injury or equipment damage may occur if any of the cautions are neglected.

 

 

 

 

 

Warnings

 

 

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or 

end-user. 

 

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation 

and region. Please refer to technical specifications for detailed information. 

 

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 

100~240 VAC, 48 VDC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications 

for detailed information. 

 

Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire 

hazard. 

 

Please make sure that the plug is firmly connected to the power socket.     

 

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then 

please contact the service center.   

Preventive and Cautionary Tips 

Before connecting and operating your device, please be advised of the following tips: 

 

Make sure that all the related equipment is power-off during the installation. 

 

Do not place the product in high-temperature or damp environment, and do not expose it to high 

electromagnetic radiation. 

 

If the product does not function properly, please contact your dealer or the nearest service center. Do not 

disassemble the product for repair or maintenance by yourself. 

 

Only use the battery, power adapter and assembly parts specified by the manufacturer. 

 

Consult the authorized dealer or technician from Hikvision for any question and request for product using. 

 

 

Warnings

 Follow these safeguards 

to prevent serious injury or death.

 

Cautions 

Follow these precautions 

to prevent potential injury or 

material damage. 

 

Summary of Contents for DS-MP3516-RS























Reviews: