Video Intercom Master Station
·
User Manual
14
The default Port No. is 554, the default user name is admin.
The port No. should be consistent with the RTSP (Real Time Streaming Protocol) port
No. of the IP camera.
When the IP camera added successfully, you can get the live view of IP camera on the
live view interface.
Adding DVR/DVS/NVR
Steps:
1.
Press the
Add Device
tab to pop up the
Select Device Type
dialogue box.
2.
Select
DVR/DVS/NVR
.
3.
Enter the corresponding device information required on the pop-up device adding
dialogue box.
Figure 3-12
NVR/DVS/NVR Adding Interface
4.
Press the
tab on the upper left corner of the dialogue box.
The default Port No. is 554, the default channel No. is 1, and the default user name is
admin.
The port No. should be consistent with the RTSP (Real Time Streaming Protocol) port
No. of DVR/DVS/NVR.
3.4.6
Synchronizing Time
Steps:
1.
Get to the configuration interface:
Settings -> Configuration
, and enter the admin
password (configuration password).
2.
Press the
Sync Time
tab.
3.
Switch
to
to enable NTP.
