Figure 3-15 Local Network Configuration
2. Enter the local IP address, subnet mask, gateway address, and port No.
3. Click Save to enable the settings.
Note
●
The default port No. is 8000.
●
After editing the local network parameters of device, you should add the
devices to the device list again.
Linked Devices Network Configuration
In the linked devices network configuration page, you can configure the network
parameters of main stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps
1. Click Linked Network Configuration to enter linked network configuration page.
2. Enter the main station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3. Select the main door station type from the drop-down list.
4. Click Save to enable the settings.
Network Indoor Station Configuration Guide
32
Summary of Contents for DS-KH6220-LE1/White
Page 1: ...Network Indoor Station Configuration Guide...
Page 52: ...UD20151B...
