Figure 2-6 Related Device
1) Set the linked device's parameters.
Note
If the device is inactive, the system will pop up the dialog to activate the device.
2) Tap to pop up the Network Settings page.
3) Edit the network parameters of the door station manually or enable DHCP to
get the network parameters automatically.
4) Tap OK to save the settings.
5. Tap Finish to save the settings.
2.3 Basic Settings
Basic settings is required before starting using the indoor station. It is necessary to
set the indoor station network, room No., linked devices, device time display, and so
on.
2.3.1 Set Indoor Station Network Parameters
Network connection is mandatory for the use of the indoor station. Set the network
parameters after activating the indoor station. Only when the IP address of the
indoor station is in the same network segment as other devices, it can work properly
in the same system.
Network Indoor Station Configuration Guide
5
Summary of Contents for DS-KH6220-LE1/White
Page 1: ...Network Indoor Station Configuration Guide...
Page 52: ...UD20151B...
