HIKVISION DS-KB6003-WIP User Manual Download Page 17 | Manualshive

Page: 17 / 18

HIKVISION DS-KB6003-WIP User Manual Download Page 17

16

4

Doorbell Operation

Via the Hik-Connect App, you can realize some certain functions of the doorbell
(including, but not limited to, live view, and remote playback).

Video Intercom

Press

Call Button

on the doorbell.

You can accept the call via the Hik-Connect App, get the live view of the doorbell, and
capture the snapshots.

Live View

Launch the Hik-Connect App and you can get the live view of the connected devices.

Playback

Launch the Hik-Connect App, tap a connected device and tap Gallery to play back.

Recording

Check the TF card status by tapping Storage Status in the Device Settings page.
If the TF card status displays as Uninitialized, tap to initialize it. The status will then
change to Normal. You can then start recording any event triggered video in the camera
of the doorbell such as motion detection video.

Alarm Notification

Launch the Hik-Connect App and tap Message to see the alarm messages, such as
motion detection alarm message.



The messages will be pushed automatically by enabling Message Push Notification.



The App can receive the triggered alarm automatically when the doorbell is powered

on by enabling Auto-Receive Alarm after Powering on.

«
...
15
16
17
18
»

Summary of Contents for DS-KB6003-WIP



















Reviews:

No comments