background image

 

 

Face Recognition Terminal

·

Quick Start Guide 

 

Quick Start Guide 

© 2018 Hangzhou Hikvision Digital Technology Co., Ltd.   
This manual is applied for face recognition terminal. 

Name 

Model 

Face Recognition Terminal 

DS-K5603-Z 

It  includes  instructions  on  how  to  use  the  Product.  The  software  embodied  in  the  Product  is 
governed by the user license agreement covering that Product. 

About this Manual 

This  Manual  is  subject  to  domestic  and  international  copyright  protection.  Hangzhou  Hikvision 
Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be 
reproduced,  changed,  translated,  or  distributed,  partially  or  wholly,  by  any  means,  without  the 
prior written permission of Hikvision.   

Trademarks 

  and  other  Hikvision  marks  are  the  property  of  Hikvision  and  are  registered 

trademarks  or  the  subject  of  applications  for  the  same  by  Hikvision  and/or  its  affiliates.  Other 
trademarks  mentioned  in  this  manual  are  the  properties  of  their  respective  owners.  No  right  of 
license is given to use such trademarks without express permission. 

Disclaimer 

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES, 
EXPRESS  OR  IMPLIED,  INCLUDING  WITHOUT  LIMITATION  THE  IMPLIED  WARRANTIES  OF 
MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE,  REGARDING  THIS  MANUAL. 
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE 
USE  OF  THE  MANUAL,  OR  THE  CORRECTNESS,  ACCURACY,  OR  RELIABILITY  OF  INFORMATION 
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE 
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.   
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY 
AT  YOUR  OWN  RISKS.  OUR  COMPANY  SHALL  NOT  TAKE  ANY  RESPONSIBILITIES  FOR  ABNORMAL 
OPERATION,  PRIVACY  LEAKAGE  OR  OTHER  DAMAGES  RESULTING  FROM  CYBER  ATTACK,  HACKER 
ATTACK,  VIRUS  INSPECTION,  OR  OTHER  INTERNET  SECURITY  RISKS;  HOWEVER,  OUR  COMPANY 
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.   
SURVEILLANCE  LAWS  VARY  BY  JURISDICTION.  PLEASE  CHECK  ALL  RELEVANT  LAWS  IN  YOUR 
JURISDICTION  BEFORE  USING  THIS  PRODUCT  IN  ORDER  TO  ENSURE  THAT  YOUR USE  CONFORMS 
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS 
USED WITH ILLEGITIMATE PURPOSES.   
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER 
PREVAILS. 

Support 

Should you have any questions, please do not hesitate to contact your local dealer. 

Summary of Contents for DS-K5603-Z

































Reviews: