Set the visitor credential allowed to be used as the pass in your company or organization.
You can select card or visitor pass.
Card
The card is issued via HikCentral ProfessionalWeb Client. For details about issuing cards, see
HikCentral Professional Web Client User Manual.
Note
Only when the visitor terminal is connected to the HikCentral Professional system, will the
card be available to be used as a type of credential by the visitor. See Connect to HikCentral
Professional (Optional) for details about connecting the visitor terminal to the system.
Visitor Pass
The visitor pass with a QR code will be printed by the visitor terminal once the visitor
completes registration.
Required Visitor Information
Select ID No., phone number, and (or) visitee as the required visitor information which should
be entered during visitor registration.
Use ID Photo as Profile
If enabled, the photo on the ID of the visitor will be used as her/his profile picture in the visitor
terminal system and the HikCentral Professional system.
Network Settings
Wired Network
View the details of the connected wired network, such as the IP address of the wired
network.
Wi-Fi
View available Wi-Fi addresses and connect the visitor terminal to one of them.
Platform Access
Set parameters to connect the visitor terminal to the HikCentral Professional system, thus
allowing the data communication between the visitor terminal and the HikCentral
Professional system.
The parameters includes HTTPS, IP address, port, user name, password, etc.
IP
Enter the IP address of the HikCentral Professional system.
Port
Enter the port No. of the HikCentral Professional system.
User Name
DS-K5032-3XFD Visitor Terminal User Manual
16