If enabled, the visitor is allowed to skip person and ID comparison at the beginning of her/his
registration.
Allow Skipping Person and ID Comparison/Temperature Screening
Note
The parameter is only available on the staff-service terminal that supports temperature
screening.
If enabled, the visitor is allowed to skip person and ID comparison and temperature
screening at the beginning of her/his registration.
Face Rating Threshold
Set a value to define the threshold to determine if the captured face picture is qualified. If the
face rating of the captured face picture is lower than the threshold, the visitor terminal system
will regard the capture as failed, and the visitor will be required to capture a face picture again.
Temperature Screening
Note
Temperature screening is only supported by certain models of the staff-service visitor terminal.
After enabled, the visitor terminal will measure the skin-surface temperatures of the visitors
and highlight the abnormal temperatures in red during face data acquisition.
Temperature Alarm Threshold (Max.)
Set the maximum skin-surface temperature that is considered normal.
If the skin-surface temperature of a visitor is higher than the threshold, temperature alarm
will be triggered (the abnormal temperature will be highlighted in red on the screen).
Temperature Alarm Threshold (Min.)
Set the minimum skin-surface temperature that is considered normal.
If the skin-surface temperature of a visitor is lower than the threshold, temperature alarm
will be triggered (the abnormal temperature will be highlighted in red on the screen).
Max. Measurement Distance (m)
The maximum allowed distance (unit: m) between the visitor terminal and the visitor for
measuring her/his skin-surface temperature. If the distance between them is longer than the
configured value, temperature measurement may fail.
You should set the value according to the environment where the visitor terminal locates. For
example, if the light condition is not sound, you can set a relatively shorter distance.
Visitor Credential
Note
The parameter is not supported on self-service visitor terminal. It is only available on staff-
service visitor terminal.
DS-K5032-3XFD Visitor Terminal User Manual
15