Full high turnstile • User Manual
14
11
A+
485 communication
12
B -
13
NO
Entry relay normally open and normally close interface which also
can connect entry counter
14
COM
15
NC
16
NO
Exit relay normally open and normally close interface which also
can connect exit counter
17
COM
18
NC
19
+12V
+12 V power supply for arm drop down circular solenoid
20
GND
21
D1
Entry LED indicator signal input
22
D2
Exit LED indicator signal input
23
+12V
+12 V power supply for indicator
24
GND
25
Down
26
Test
27
+12V
Position sensor full close in place signal input,once arm turn 120
degree , it will give closing gate signal
28
POS
29
SW1
Entry opening signal input, Dry contact signal and Access control
PCB board entry opening relay signal (NO connect SW1, COM
connect GND, and the relay time of access control board should
be set “0” or “1”
）
30
GND
31
SW2
Exit opening signal input, Dry contact signal and Access control PCB
board exit opening relay signal (NO connect SW2, COM connect
GND, and the relay time of access control board should be set
“0” or “1”
））
32
GND
33
+24V
Output for entry square solenoid, normally 0v t, when board
recieve open singal,This port will be 24v output
34
GND
35
+24V
Output for exit square solenoid, normally 0v t, when board recieve
open singal,This port will be 24v output
36
GND
