Full high turnstile • User Manual
9
10
Fire /Emergency Alarm/
Gate open, free for passing
11
Working Temperature
-20
℃
~+70
℃
12
Working environment
Indoor and outdoor
Chapter 2 Equipment Installations
Installation notes
Please read this manual carefully before install it;
As for the convenience of installation and maintenance, installation space height of at least
2.6 meters;
Make sure the whole is horizontal and the shaft is vertical;
Protective earth wire must be connected;
Please check all wires has been properly connected before power on;
Please test all function before using;
Equipment Installation
1) Tool
preparations
1
A set of hexagon spanner
5
Screw driver and other common wiring
tool
2
Cross screwdriver 6mm
6
Millimeter
3
Open spanner 17-19mm
7
M12x100 Expansion screws 8pcs
4
Impact drill(including D16 and
D14 drills)
8
Cable Tester
2) Ensure the installation location and the system composition ,prepare to install after carrying out
the system planning;
3) Make well of installation of equipment foundation base.
