Figure 4-3 Secure Door Control Unit Wiring
Note
The secure door control unit should connect to an external power
supply separately. The suggested external power supply is 12V,
0.5A.
5 Activation
You should activate the device before the first login. After
powering on the device, the system will switch to Device
Activation page.
Activation via the device, SADP tool and the client software are
supported.
The default values of the device are as follows:
• The default IP address: 192.0.0.64
• The default port No.: 8000
• The default user name: admin
5.1 Activate via Device
If the device is not activated, you can activate the device after it is
powered on.
On the Activate Device page, create a password and confirm the
password. Tap Activate and the device will activated.
Figure 5-1 Activation Page
Caution
The password strength of the device can be automatically
checked. We highly recommend you change the password of your
own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your
password regularly, especially in the high security system,
14
