HIKVISION DS-C12A, User Manual, Page: 20 / 43

5. Optional: Set Background Color of your displays. The background color applies to all displays.
6. Click Add to Wall to add the displays to the video wall canvas on the right.
3.1.2 Configure Display Properties
After adding displays to the wall, configure display properties to ensure proper displaying.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Select a display on the wall and configure the properties.
Table 3-1 Description of Display Properties
Property Description
Output Type Output type of your display. LCD and LED types are available.
Manufacturer/Model Manufacturer and model of your display. After the manufacturer and
model are selected, the rest of the properties are automatically
configured. Please check that the values are consistent with the actual
values.
Output Resolution Please select the proper resolution based on the actual need.
Display Area Width/
Height
Enter the actual display area width and height of your display. The
display area does not include the borders and bezels around the area.
Bezel Top/​Bottom/
Left/​Right
Bezel width on the top, bottom, left, and right of the screen. The bezel
width here is made up of the widths of the physical bezel and the
black border.
LED Resolution Only available when your display is an LED type. The resolution must
be smaller than or equal to Output Resolution but greater than 288 ×
288, and the width should be a multiple of two.
3. Click Save.
3.1.3 Adjust Display Positions
After adding and configuring the displays, adjust the positions to obtain an artistic video wall
effect.
Steps
1. Click Artistic Configuration → Display Configuration .
2. Select a display on the wall, and adjust its position.
Video Wall Controller User Manual
11