HIKVISION DS-AT1000S Series, Quick Start Manual, Page: 11 / 29

DS-AT1000S Series Storage System Quick Start Guide
10
DS-AT1000S/160, DS-AT1000S/240, DS-AT1000S/300, and DS-AT1000S/320
Figure 2-7 Front Panel Buttons
Figure 2-8 Button Description
system.

The indicator shows green when the system is
running.
Positioning button and
indicator

Press this button or click Positioning on GUI to
trigger locating function. Press the button again
to disable locating function.

The indicator flashes in blue when locating
function is triggered.
Mute button and alarm
indicator When an alarm is triggered, the indicator flashes in
red and buzzer beeps. Press the button to stop
beeping.
Power indicator for controller A When controller A is connected and is running, the
indicator is green.
Power indicator for controller B When controller B is connected and is running, the
indicator is green.
Fault indicator for controller A

When a fault occurs in controller A, the indicator
flashes in red.

When controller A does not exit, the indicator is
unlit.
Fault indicator for controller B

When a fault occurs in controller B, the indicator
flashes in red.

When controller B does not exit, the indicator is
unlit.
Button Name Description