HIKVISION DS-9500NI-S series, User Manual

Page: 50 / 65

49
9.4.5 Exceptions
Exception parameters are for the alarm handle of abnormal event, which is including “HDD Full”, “HDD Fault” (HDD
errors or HDD not initialization), “Network Broken”, “IP Address Conflict”, “Illegal Access” (user name or password
wrong), “Video Output Standard Mismatch” and “Video Signal Exception” (video signal unstable).
Step4: Set the fortify time for video tampering.
Click “Settings” in “Arm Schedule” menu.
Select “Weekday” as some day of the week or the whole week
for the arm schedule.
The “All Day Record” or 8 “Periods” can be selected as well.
Note:
The time of each segment can not be overlapped.
Step5: Set linkage for video tampering.
Click “Settings” in the “Linkage” menu.
第二步：使“启用遮挡报警”的状态为 ，激活遮挡
区域、布防时间和联动方式的设置。
Step3: Set the video tampering area and sensitivity.
The sensitivity can be divided into three levels: Low,
Medium, and High.
Enable “Start Draw”, and select the detection area by using
mouse.