HIKVISION DS-9100HWI-ST Series User Manual Download Page 194

Page: 194 / 200

User Manual of DS-9100HWI-ST Series DVR

193

the user.

Local Configuration

•

Local Log Search:Searching and viewing logs and system information of DVR.

•

Local Parameters Settings:Configuringparameters, restoringfactory default parameters and
importing/exporting configuration files.

•

Local Advanced Operation:Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearingI/O alarm output.

•

Local Shutdown Reboot: Shutting down or rebootingthe DVR.

Remote Configuration

•

Remote Log Search: Remotely viewing logs that are saved on the DVR.

•

Remote Parameters Settings: Remotely configuringparameters, restoringfactory default
parameters and importing/exporting configuration files.

•

Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.

•

Remote Video Output Control: Sending remote button control signal.

•

Two-Way Audio: Realizing two-way radio between the remote client and the DVR.

•

Remote Alarm Control: Remotely arming (notify alarm and exception messageto the remote
client) and controlling the alarm output.

•

Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearingI/O alarm output.

•

Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR.

Camera Configuration

•

Remote Live View: Remotely viewing live video of the selected camera (s).

•

Local Manual Operation: Locally starting/stopping manual recording, picture capturing and
alarm outputof the selected camera (s).

•

Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and
alarm outputof the selected camera (s).

•

Local Playback: Locally playing back recorded filesof the selected camera (s).

•

Remote Playback: Remotely playing back recorded filesof the selected camera (s).

•

Local PTZ Control: Locally controllingPTZ movement of the selected camera (s).

•

Remote PTZ Control: Remotely controllingPTZ movement of the selected camera (s).

•

Local Video Export: Locally exporting recorded files of the selected camera (s).

Click the

button to savethe settings and exit interface.

Note:

Only the admin user account has the permission of restoring factory default parameters.

13.4.2 Deleting a User

Steps:

Enter the User Managementinterface.

Menu >Configuration>User

Select the user to be deleted from the list, as shown in Figure 13.8.

Summary of Contents for DS-9100HWI-ST Series









































































































































































































Search results

Summary of Contents for DS-9100HWI-ST Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-9100HWI-ST Series, User Manual

Search results

Summary of Contents for DS-9100HWI-ST Series

Reviews:

Brands by name

Popular brands