HIKVISION DS-9000 Series, User Manual

Page: 101 / 137

User Manual of DS-9000/9100/9600 Series DVR
100
finish the settings.
Figure 3. One-touch Array Configuration is Complete
Note:
1) After completion of One-touch Configuration, the device will create 1 array and 8 virtual disks automatically.
And the array capacity will be equally allocated to each virtual disk.
2) By default, the foreground initialization is used when the configuration is finished. And the hard disk can be
used only after the initialization is complete.
Adding Array
To add an array:
1.
Enter the RAID Settings menu, shown in Figure 4 by clicking Menu > Settings >RAID.
Figure 4. RAID Settings Menu
2. Select the physical HDD from the list.
3. Click the Create button to enter the Create Array interface.
4. Edit the Array Name.
5. Set the RAID Level to RAID 0, 1, 5 or 10.
6. Select the physical HDD to be used for array creation.
Figure 5. Create Array