HIKVISION DS-8100HMFI-TH Series, User Manual

Page: 33 / 72

User Manual of DS-8100HMFI-TH Series Mobile DVR
32
32
Figure 3. 2 Record Settings Interface
2. Select the channel to set the parameters.
3. Configure the following settings:
•
Encoding Parameters:
Main Stream (Normal) , Main Stream (Event) and Sub Stream options are available. Main Stream
(Normal) is used for schedule recording; Main Stream (Event) is used for event recording; Sub Stream is
used for network transmission.
•
Stream Type:
Video and Video & Audio options are available.
•
Resolution:
You can select 4CIF , DCIF , 2CIF , CIF or QCIF .
Note: The resolution of main stream cannot be lower than that of sub stream.
•
Bitrate Type:
Variable and Constant options are available
•
Video Quality:
If you set the Bitrate Type to Variable , you can select the video quality, including Highest , Higher ,
Medium , Low , Lower and Lowest .
•
Frame Rate:
You can set the FPS (frames per second). 1/16, 1/8, 1/4, 1/2, 1, 2, 4, 6, 8, 10, 12, 15, 16, 18, 20, 22 and 25
(PAL) / 30 (NTSC) options are available.
4. Click the Set button for Schedule to enter the record schedule interface, as shown in Figure 3.3.
1) Select the check box for the Enable Schedule item.
2) You can choose the day to which you want to set schedule.
3) To schedule an all-day recording, check the checkbox for the All Day item.
4) To arrange other schedule, leave the All Day checkbox blank and set the time period.
5) The Type can be set as Normal , Motion Detection , Alarm , Motion | Alarm , Motion & Alarm . Please refer