Quick Operation Guide of DS-9100/9000/8100/8000HFI-ST Series DVR
27
Alarm & Record
PTZ Control
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you set the PTZ camera.
Before you start, please check that the PTZ and the DVR are connected properly through RS-485 interface.
PTZ Settings
To configure PTZ settings:
1.
Enter the PTZ Settings interface.
Menu >Camera> PTZ
DS-9100/8100HFI-ST
DS-9000/8000HFI-ST
2.
Choose the camera for PTZ setting next to
Camera
label.
3.
Enter the parameters of the PTZ camera.
Note:
All the parameters should be exactly the same as the PTZ camera parameters.
4.
Click
Copy
if you want to configure same settings to other PTZ cameras.
5.
Click the
Apply
button to save and exit the interface.
Record (manual record, schedule record, motion detection or alarm triggered record)
