Home
/
HIKVISION
/
DS-7600NXI-8P/S Series
/
User Manual

HIKVISION DS-7600NXI-8P/S Series, User Manual, Page: 113 / 209

Share

Page: 113 / 209

HIKVISION DS-7600NXI-8P/S Series User Manual Download Page 113

Network Video Recorder User Manual

94

4. Optional: Select pictures and click Copy to to copy the uploaded pictures of the current library

to other library.

5. Optional: Select a picture and click Edit to modify the picture information.
6. Optional: Select a picture from the list and click Delete to delete the picture.
7. Optional: Select a library and click Export Face Picture Library to export library to backup

device.

8. Optional: Click

or

to view by figure or list.

6.2.4 Face Picture Comparison Alarm

Configure Face Picture Comparison

Compare detected face pictures with specified face picture library. Trigger alarm when comparison
succeeded.

Steps
1. Go to Smart Analysis → Smart Event Settings → Facial Recognition.
2. Select a camera.
3. Click Face Picture Comparison.

«
...
111
112
113
114
115
...
»

Summary of Contents for DS-7600NXI-8P/S Series


















































































































































































































Reviews:

No comments