HIKVISION DS-7300HI-S Series Page 93 User Manual Download

Page: 93 / 98

HIKVISION DS-7300HI-S User‟s Manual

Restoring Default Settings

To restore default factory settings to your DVR:

Enter the Default Settings menu, shown in Figure 13 by clicking Menu > Maintenance > Default.

Figure 13. Default Settings Menu

Select OK to restore factory defaults.

Note:

Network information such as IP address, subnet mask and gateway will not be restored.

Viewing System Information

To view system information:

Enter into the Information menu, shown in Figure 14 by clicking Menu > Maintenance > Information.

Select OK to exit to the previous screen.

Viewing System Logs

Many events of your DVR are logged into the system logs.

To access the system logs and search for these events:

Enter the Log Search menu, shown in Figure 15 by clicking Menu > Maintenance > Log Search.

Summary of Contents for DS-7300HI-S Series



































































































Search results

Summary of Contents for DS-7300HI-S Series

Reviews:

Related manuals for DS-7300HI-S Series

Brands by name

Popular brands

HIKVISION DS-7300HI-S Series, User Manual

Search results

Summary of Contents for DS-7300HI-S Series

Reviews:

Related manuals for DS-7300HI-S Series

Brands by name

Popular brands