HIKVISION DS-7300HI-S Series User Manual Download Page 85

Page: 85 / 98

HIKVISION DS-7300HI-S User‟s Manual

Configuring System Settings

Configuring General Settings

General settings such as the system language can be configured in the General Settings menu of your DVR.

To configure general settings:

Enter the General Settings menu, shown in Figure 1 by clicking Menu > Setting > General.

Figure 1. General Settings Menu

Select the

General

tab.

Configure general settings. These settings include:

• Language:

Default language used in DVR menus.

• CVBS Output Standard:

Video output standard: NTSC and PAL.

• VGA Resolution:

VGA output resolution.

• Time Zone:

Time zone to use for DVR.

• Menu Date Format:

Format to use for date.

• System Time:

System time and date.

• Mouse Pointer Speed:

Speed of mouse pointer.

• Enable Password:

Enable/disable system password.

Note:

If the video standard is different between the input and the output, you may notice flickering in Live Preview

mode.

Configuring Advanced Settings

To configure more advanced settings:

Enter the General Settings menu, shown in Figure 1 by clicking Menu > Setting > General.

Click the

More Settings

tab; this will take you to the More Settings menu, shown in Figure 2.

Summary of Contents for DS-7300HI-S Series



































































































Search results

Summary of Contents for DS-7300HI-S Series

Reviews:

HIKVISION DS-7300HI-S Series, User Manual, Page: 85 / 98

Search results

Summary of Contents for DS-7300HI-S Series

Reviews: