manualshive.com logo in svg

HIKVISION DS-7204HI series, User Manual

Share
Download
HIKVISION DS-7204HI series User Manual Download Page 5

 

Support dual-stream and the sub stream can support CIF/QCIF 

compression resolution. 

 

Storage function: 

 

 

1 IDE interface for 1 HDD. The HDD can be supported 2000GB maximum. 

 

 

Support HDD S.M.A.R.T function. 

 

 

Support FAT32 file system. 

 

Support many record mode: all time record, motion detect record, external alarm record, 

motion & alarm record, motion | alarm record, manual record. 

 

 

Support cycle and non-cycle record mode. 

 

 

Support USB flash disk, USB hard disk and USB CD/DVD for backup.   

Preview

 & 

Playback

 

function

: 

  

Support one composite video output and one spot video output 

   

DS-7204HI-V can support one VGA output. 
Support playback fast, slow, pause, forward, backward, frame by frame, etc. 
Use define preview layout. 
Support one channel playback 

Network

 

function

: 

 

 

Support TCP, UTP, RTP, Multicast, DHCP, etc. 

 

Support ADSL (PPPoE) dialup function. 

  Remote 

parameters 

setup. 

  Remote 

playback, 

download 

the recorded files in DVR. 

 

 

Remote upgrade DVR firmware. 

  Remote 

control 

PTZ. 

 

Support Internet Explore for network control 

 

 

Remote get alarm information of DVR. 

Others: 

Support network voice talk. 
Support PTZ local and remote control. 
Support multi-lever user management. 
Support local and remote search log function. 
Automatically recovery from exceptions leads to high reliable. 
Provide SDK and demo source code to shorten the application development 
time. 

 

5

Summary of Contents for DS-7204HI series
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands