manualshive.com logo in svg

HIKVISION DS-7204HI series, User Manual

Share
Download
HIKVISION DS-7204HI series User Manual Download Page 17

Chapter4 Basic 

Operation 

Guide 

4.1   Power  on 

Note: Please make sure the power supply matches DVR and AC adapter 

connected correctly. Before switch DVR on, please connect one monitor with 
VOUT or VGA interface. Otherwise, you can not see graphic user interface and 
can not operate.   

 

If

【

POWER

】

lamp is off, please do as following:   

Step1: Connect power supply correctly; 
Step2: Switch on the power button on the rear panel.   

 
If

【

POWER

】

lamp is in red, just press

【

POWER

】

button to start DVR. 

 
When DVR is started,

【

POWER

】

lamp is in green. On the monitor or VGA 

display, DSP and HDD initialization process will be shown.   

The first line represents DSP initialization. If the DSP icon is “

×

”, it means that 

the DSP is initialized error, please contact administrator at once. 

The second line represents HDD initialization. If the HDD icon is “

×

”, it means 

the corresponding HDD is not installed or not detected. If HDD is not detected, please 
contact administrator.   

 

Note: If HDD is not installed or not detected, DVR will beep for alarm. You can 
disable the buzzing in “alarm” menu ->”Exceptions” option.

  

4.2   Preview 

DVR will enter into preview mode after it is started. 
On preview screen, you can see date, time, camera name and camera status icon. 
Set system date and time in “Camera” 

→

 “Date OSD” menu, please refer to 5.5; 

Change camera name in “Camera” menu, please refer to 5.5 

In the screen, it will display record and alarm status of each camera. Shown as 

fig 4.1, These two kinds of status will switch over automatically. 

Press

【

A

】

key to display or hide the camera status bar. 

 
 

 

 17

Summary of Contents for DS-7204HI series
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands