HIKVISION DS-7204HFI-ST User Manual Download Page 25

Page: 25 / 73

Hikvision EURO, Inc. DS-72xx Series Embedded Net DVR User Manual

Checking the Status of Your DVR

The current status of your DVR can be checked at anytime by going to the Status menu. The status menu, shown

in Figure 12 can be accessed by going to Main Menu > Status.

Figure 12. Status Menu

The items that are found on the Status menu include:

• Device Information:

The model number of the DVR, serial No., the current firmware version installed on

DVR, etc.

•

Chan Status:

Cameras working status in DVR such as motion, tampering, video loss and video exception.

•

Record Status:

Recording status of the cameras, including: stream type, frame rate, bit rate, resolution, record

type, etc.

• Alarm Status:

The status of external alarm in/out on DVR

•

Network Status:

Network status such as IP address, gateway, DNS server, client port, etc.

• HD Status:

Hard disk status on DVR.

Summary of Contents for DS-7204HFI-ST










































































Search results

Summary of Contents for DS-7204HFI-ST

Reviews:

Related manuals for DS-7204HFI-ST

Brands by name

Popular brands

HIKVISION DS-7204HFI-ST, User Manual

Search results

Summary of Contents for DS-7204HFI-ST

Reviews:

Related manuals for DS-7204HFI-ST

Brands by name

Popular brands