92
Reset Password
(New Hikvision Secure Activation Password Strategy)
To reset passwords with the new Hikvision Secure Activation Password Strategy, you must use
SADP Tools software (
v2.2.3.5 Build 20150408
) or later (Figure 102). It can be downloaded
from our download portal at
It can be used on front-end and
back-end devices with firmware shown in the following table:
Device Firmware with Secure Activation
Device Type
Model Number
Firmware Version
Value Series IP Camera
DS-2CD2xxx
V5.3.0
Smart Series IP Camera
DS-2CD4xxx
V5.3.0
NVR/Hybrid
DS-9016HWI-ST
DS-96xxNI-ST
DS-7716NI-SP/16
V3.1.5
Plug-n-Play NVR
DS-76xxNI-EI(E2)/P
V3.1.0
Turbo DVR
DS-72xxHGHI-SH
DS-73xxHQHI-SH
V3.1.6
Super NVR
DS-96128NI-E24/H
DS-96256NI-E24/H
TBD
Figure 102 You need to download a new version of the SADP Tool software (v2.2.3.5 Build 20150408)
NOTE:
Once you update your DVR/NVR or camera firmware, it
cannot
be downgraded
to a previous version; the upgrade
is not
reversible.
By using the new SADP Tool you can determine if the front-end device is using
OLD
or
NEW
firmware. If your device has old firmware v3.1.0 (Figure 103
), you’ll need to reset the password
by using the old procedure. With the new firmware v3.3.0 (Figure 104), the default username
and password (
admin, 12345
) are no longer applicable. The user will be prompted to assign a
new password during the initial password reset attempt.
Summary of Contents for DS-7200HGHI-SH Series
