DS-8100/7300/7200-S Series DVR Quick Operation Guide
13
DS-8104AH (F) (L) I-S Front Panel
1.
USB Interfaces:
Universal Serial Bus (USB) ports for additional devices such as USB mouse and
USB Hard Disk Drive (HDD).
2.
Status Indicators:
Status indicators for different features of the DVR.
•
Power:
Power indicator turns red when the DVR is switched on.
•
Ready:
Ready indicator turns green when DVR is functioning properly.
•
Status:
Status indicator turns green when DVR is controlled by an IR remote.
•
Alarm:
Alarm indicator turns red when a sensor alarm is detected.
•
Modem:
Reserved.
•
HDD:
HDD indicator blinks red when data is being read from or written to HDD.
•
Link:
Link indictor is blue when network connection is functioning properly.
•
Tx/Rx:
TX/RX indictor blinks blue when network connection is functioning properly.
•
NumLock:
Press SHIFT button, the NumLock indictor will turn on to blue, the control buttons
will be used to input letters and numbers. Press SHIFT button again, the NumLock indictor will
turn off, and the control buttons will resume.
•
Ch1-Ch4:
Channel status indictor is blue when recording is functioning, red when networking is
functioning, orange when recording and networking are both functioning.
3.
Control Buttons:
•
1/MENU Button:
The 1/MENU button works as numeric [1]. Pressing this button will return the
user to the Main menu (after successful login). The 1/MENU button will also bring up Sensitivity
Interface settings.
•
2ABC/VOIP:
The 2ABC button works as numeric [2] and letter [ABC]. When it is used in a list
field will select all items on the list.
•
3DEF/INFO:
The 3DEF button works as numeric [3] and letter [DEF]. It is also used to cycle
through tab pages.
•
4GHI/ESC:
The 4GHI/ESC button works as numeric [4] and letter [GHI], it is also used to
escape to the previous menu
•
5JKL/EDIT:
The 5JKL/EDIT button works as numeric [5] and letter [JKL]. The 5JKL/EDIT
