Quick Start Guide
72xx Series DVR
Hikvision EURO, Inc. DS-72xx Series Embedded Net DVR Installation Guide and Quick Start Guide
21
Figure 4: DS-7216HVI-ST(/SE)
Notes:
For DS-7204HVI-ST/M and DS-7204HVI-ST/E, there is not button in front panel.
The controls on the front panel include:
1.
USB Ports:
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk
Drive (HDD).
2.
Status Indicators:
Status indicators for different features of the DVR.
• Alarm:
Alarm indicator turns red when a sensor alarm is detected.
• Ready:
Ready indicator turns green when DVR is functioning properly.
• Status:
Status indicator turns green when DVR is controlled by an IR remote.
• HDD:
HDD indicator blinks red when data is being read from or written to HDD.
• Tx/Rx:
Tx/Rx indictor blinks blue when network connection is functioning properly.
3.
Control Buttons:
• MENU:
(1) Enter numeral “1”; (2) Access the main menu interface.
• 2/ABC/F1:
(1) Enter numeral “2”; (2) Enter letters “ABC”; (3) [Zoom-] in PTZ control mode
• 3/DEF/F2:
(1) Enter numeral “3”; (2) Enter letters “DEF”; (3) [Zoom+] in PTZ control mode
• 4GHI/ESC:
(1) Enter numeral “4”; (2) Enter letters “GHI”; (3) Exit and back to the previous menu.
• 5JKL/EDIT:
(1) Enter numeral “5”; (2) Enter letters “JKL”; (3) Delete characters before cursor; (4)Select
the checkbox and ON/OFF switch; (4) [Iris+] in PTZ control mode
• 6MNO/PLAY:
(1) Enter numeral “6”; (2) Enter letters “MNO”; (3) Playback, for direct access to playback
interface.
• 7PQRS/REC:
(1) Enter numeral “7”; (2) Enter letters “PQRS”; (3) Manual record, for direct access to
manual record interface; manually enable/disable record.
• 8TQV/PTZ:
(1) Enter numeral “8”; (2) Enter letters “TQV”; (3) Access PTZ control interface;
(4) [Iris-] in PTZ control mode.
• 9WXYZ/PREV:
(1) Enter numeral “9”; (2) Enter letters “WXYZ”; (3) Multi-camera display in preview; (4)
[Focus-] in PTZ control mode
• 0/A:
(1) Enter numeral “0”; (2) switch between input methods (upper and lowercase alphabet, symbols and
numeric input); (3) [Focus+] in PTZ control mode
•
SHIFT:
The SHIFT button is used for switch button action between numeric button and control button.
